师资概况
  网站公告
  友情链接
·大连理工大学
·大连理工大学运载工程与力学
·大连理工大学工业装备结构分
·中华人民共和国科学技术部
·教育部
·大连理工大学人事处
·计算力学学报
更多>>  
当前位置: 首页>>师资队伍>>师资概况>>讲师>>韩啸>>师资介绍>>正文

韩啸


韩啸

电子信箱:hanxiao@dlut.edu.cn

个人简介

工作经历:

2015.01 -至今大连理工大学工程力学系讲师硕士研究生导师

教育经历:

2011.09 - 2014.10大连理工大学汽车工程学院车辆工程专业博士

2012.09 - 2013.09英国萨里大学机械工程系机械工程专业公派联合培养

2009.09 - 2011.07大连理工大学工程力学系工程力学专业硕士

2005.09 - 2009.07大连理工大学工程力学系工程力学专业本科

社会兼职

International Journal of Adhesion and Adhesives, The Journal of Adhesion, Journal of Adhesion Science & Technology, Composites: Part B, Theoretical and Applied Fracture Mechanics和固体力学学报等学术期刊审稿人。

Society for Adhesion and Adhesives,北京粘接学会会员

研究领域(研究课题)

1.复合材料轻量化连接方法工艺和力学性能测试;

2.轻量化接头多场耦合环境老化行为试验设计和力学建模;

3.异种材料接头加载破坏过程断裂力学建模和胶层裂纹扩展数值模拟。

主持的科研项目:

1.国家自然科学基金青年科学基金项目,湿-热-交变载荷耦合作用下胶接结构强度退化预测模型研究,2017-2019.

2.中国博士后科学基金面上资助项目,异种材料胶铆接头多场耦合环境耐久性试验和建模研究,2015-2017.

3.辽宁省教育厅科学研究一般项目,异质材料结构胶接接头基本力学性能及其环境耐久性研究,2015-2017.

4.中央高校基本科研业务费专项资金资助,结构胶接接头的环境退化行为研究,2015-2016.

硕博研究方向

招收硕士研究生专业:

1.工程力学

2.制造工艺力学

欢迎力学、机械、材料、船舶、航空航天和化工等专业方向学生报考!

出版著作和论文

学术期刊:

X Han, AD Crocombe*, SNR Anwar, et al. The strength prediction of adhesive single lap joints exposed to long term loading in a hostile environment[J]. International Journal of Adhesion and Adhesives, 2014,55:1-11.

X Han, AD Crocombe*, SNR Anwar, et al. The effect of a hot–wet environment on adhesively bonded joints under a sustained load[J]. The Journal of Adhesion, 2014,90(5-6):420-436.

P Hu, X Han, LFM da Silva, et al. Strength prediction of adhesively bonded joints under cyclic thermal loading using a cohesive zone model[J]. International Journal of Adhesion and Adhesives, 2013,41:6-15.

P Hu, X Han, WD Li*, et al. Research on the static strength performance of adhesive single lap joints subjected to extreme temperature environment for automotive industry[J]. International Journal of Adhesion and Adhesives, 2013,41:119-126.

WD Li, LP Tang, X Han*, et al. The effect of constant loading on the mechanical behavior of bulk adhesive[J]. The Journal of Adhesion, 2016.

WD Li, M Ma, X Han*, et al. Strength prediction of adhesively bonded single lap joints under salt spray environment using a cohesive zone model[J]. The Journal of Adhesion, 2016, 92(11):916-937.

WD Li, P Bo, X Han*, et al. Predicting the strength of adhesively bonded t-joints under cyclic temperature using a cohesive zone model[J]. The Journal of Adhesion, 2016, 92(11):892-907.

P Hu, Q Shao, WD Li*, X Han. Experimental and numerical analysis on load capacity and failure process of T-joint effect produced by the bond-line length[J]. International Journal of Adhesion & Adhesives, 2012,38:17-24.

P Hu, ZW Shi, XX Wang, WD Li, SG Zhou, X Han. Strength degradation of adhesively bonded single-lap joints in cyclic-temperature environment using a cohesive zone model[J]. The Journal of Adhesion, 2015,91(8):587-603.

胡平,韩啸,李伟东等.考虑汽车车身涂装工艺影响的非平衡胶接接头强度[J].机械工程学报, 2012(48), 93-102.

韩啸,李伟东,胡平.非平衡胶接接头循环温度场强度退化研究[J].机械工程学报, 2012(48), 97-103.

X Han, WB Hou, P Hu. A simulation study on stiffness of thin-walled beam structure for automobile body[J]. Chinese Journal of Automotive Design, 2011,12:8-13.

学术会议:

X Han, WD Li, M Ma, et al. Experimental and modelling study on the strength degradation of adhesive joints after long-term salt spray exposure[C]. 13th International Triennial Conference on the Science and Technology of Adhesion and Adhesives, Glasgow, UK, 2016.

X Han, AD Crocombe*, P Hu, WD Li. Effect of hostile environment on adhesive single lap joints under constant loading[C]. 2nd International Conference on Structural Adhesive Bonding, Porto, Portugal, 2013.

SNR Anwar, X Han, AD Crocombe*, et al. The effect of sustained load on the environmental degradation of adhesively bonded joints[C]. 12th International Triennial Conference on the Science and Technology of Adhesion and Adhesives, York, UK, 2013.

X Han, WB Hou, P Hu. Theoretical and numerical analysis on material-stiffness characteristics for thin-walled beams on vehicles[C]. Proceedings of the ASME 2011 International Design Engineering Technical Conference, Washington DC, USA, 2011.

P Hu, X Han, L Li, Q Shao, WD Li. Effect of temperature on shear strength of adhesively bonded joints for automobile industry[C]. 2nd International Conference on Advances in Materials and Manufacturing, Guilin, China, 2011.

P Hu, X Han, WD Li. Research on the strength degradation of unbalanced adhesive joints subjected to extreme-temperature environment[C]. 2012 China Automobile Lightweight Technology Conference, Beijing, China, 2012.

X Han, WB Hou, ZJ Bi, P Hu*. Theoretical analysis and numerical simulation on characterization of the material stiffness in automobile body[C]. 7th China CAE Engineering Analysis Technology Annual Conference, Kunming, China, 2011.

工作成果(奖励、专利等)

运载工程与力学学部青年教师讲课竞赛一等奖

博士研究生国家奖学金

钱令希力学奖学金二等奖

关闭

地址:中国·辽宁省大连市甘井子区凌工路2号 大连理工大学  邮编:116023  电话:0411-84708390
版权所有:大连理工大学工程力学系  Copyright © 2010 All rights reserved.  
技术支持:大连理工大学N维网